News

The Cylinder Balance Test is a key diagnostic tool that measures how well each cylinder in your engine is functioning. It helps spot problems like misfires or fuel delivery issues, ensuring your engine runs smoothly and efficiently, and preventing costly repairs down the line.

To clear a permanent engine code, you must first resolve the root cause, then complete a specific drive cycle. If the code persists, advanced diagnostic steps or an ECU update might be necessary. Regular maintenance can help prevent these stubborn codes from reappearing.

Performing an AdBlue reset after refilling or maintenance ensures your vehicle's system accurately detects AdBlue levels, preventing unnecessary warnings and performance issues. Regular resets are key to maintaining compliance with emissions laws and prolonging the life of your diesel engine's SCR system.

Injector coding fine-tunes engine performance by aligning each fuel injector with the engine's unique requirements. This process ensures optimal fuel efficiency, reduces emissions, and prolongs engine life. Learn how to properly perform injector coding to keep your vehicle running smoothly.

A faulty Engine Control Module (ECM) can cause engine misfires, stalling, poor fuel economy, and starting issues. The ECM manages key engine functions, and when it malfunctions, it sends incorrect signals. Regular diagnostics with tools like the ANCEL X7 car scanner can help identify these problems.

Reset your ECU using an OBD scanner or by disconnecting the battery. Both methods clear error codes, turn off the check engine light, and may enhance vehicle performance.

A vacuum leak can throw off your engine's performance, causing rough idling, poor fuel economy, and even long-term damage. Identifying the issue early with the ANCEL X7 OBD2 scanner or ANCEL S3000 smoke leak detector ensures quick repairs and helps maintain optimal engine health.

An OBD2 car scanner might damage your ECU, though the chances are low. The main risks come from poor-quality scanners, improper use, and software conflicts. To reduce this risk, choose a reliable scanner, adhere to usage guidelines, keep your vehicle’s software updated, and handle connections properly.

A knock sensor detects vibrations from engine knocking, signaling the ECU to adjust ignition timing, preventing damage and optimizing performance. If it fails, the engine may suffer from reduced power, increased fuel consumption, and potential long-term damage, leading to expensive repairs.

If your check engine light is on, you can reset it without a pricey scanner. Disconnect the car battery, toggle the ignition on and off, use the odometer reset button, or drive normally for a few cycles. These simple steps might turn off the light and help you avoid costly repairs.

The coolant temperature sensor (CTS) is an essential component of a vehicle’s engine management system. It monitors...

The connecting rod is a key component in an internal combustion engine, connecting the piston to the crankshaft. It converts the up-and-down motion of the piston into the rotational motion needed to drive the vehicle, making it essential for efficient engine performance.

Diesel engines are the backbone of heavy-duty transportation, construction, and industrial machinery, known for the...

TPMS reprogramming involves adjusting the sensor settings to communicate with the vehicle's system, often needed when installing new sensors or switching brands. TPMS relearning teaches the vehicle's computer to recognize sensor positions after tire rotations or replacements. Both processes ensure accurate tire pressure monitoring.

To clean your Idle Air Control (IAC) valve, first disconnect the battery and remove the valve from the throttle body. Use a throttle body cleaner to clear away carbon deposits. Once clean, reinstall the valve, reconnect the battery, and test the engine to ensure smooth idling and prevent stalling issues.

Common signs of a failing transmission solenoid include delayed shifting, transmission slipping, and overheating. Using tools like the ANCEL V6 Pro car scanner can diagnose issues early, helping to prevent severe damage and costly repairs, ensuring your vehicle runs smoothly.

Brake lights are crucial for preventing rear-end collisions. Common problems like blown fuses, burned-out bulbs, or a faulty brake light switch can cause them to fail. Regular inspection and easy fixes can keep them working, ensuring your safety and compliance with traffic laws.

Unlocking your car radio without a code is easier than you think. Start by retrieving your radio’s serial number or checking the user manual. Use your VIN to get the code from the manufacturer. With tools like the ANCEL V6 Pro car scanner, you can also diagnose and fix other automotive issues.

A failing fuel pump can cause symptoms like difficulty starting, engine stalling, and decreased fuel efficiency. Listen for whining noises from the fuel tank and loss of power during acceleration. Using a scan tool, such as the ANCEL V6 Pro, can help diagnose and resolve fuel pump issues quickly.

Diagnosing and repairing a faulty cooling fan motor relay is essential to prevent engine overheating. Common symptoms include the cooling fan not operating, intermittent fan operation, and engine overheating. Replacing the relay is a straightforward process that can often be done DIY with basic tools.

If your car won't rev past 4000 RPM, it could be due to issues like a clogged air filter, faulty MAF sensor, ignition problems, or exhaust blockages. Transmission or ECU faults and vacuum leaks may also be culprits. Diagnostic tools like the ANCEL V6Pro and ANCEL DS3000 can help identify and resolve these issues.

GDI injector maintenance is vital for engine health. The ANCEL AJ400 provides a powerful, eco-friendly cleaning solution with ultrasonic technology, effectively removing carbon deposits. It also features injector resistance and spray pattern testing, ensuring consistent and reliable performance.

The ECM module in a Chrysler controls essential engine functions. Its location varies by model, commonly found under the hood near the battery, behind the glove box, under the driver’s side dashboard, or beneath the center console. Accurate location helps in diagnostics and repairs.

The O2 sensor, also known as the lambda sensor, monitors oxygen levels in vehicle exhaust gases. It sends data to the ECU to adjust the air-fuel mixture, ensuring efficient combustion, reduced emissions, and improved fuel economy. Regular checks and replacements are crucial for performance.

Vehicle Speed Sensors (VSS) are crucial for measuring wheel or transmission speed, sending this data to the ECU. This information is vital for optimizing engine performance, smooth transmission shifts, enhancing safety systems like ABS, and ensuring accurate speedometer and odometer readings.

Oxygen sensors monitor exhaust gases to maintain optimal air-fuel ratios, ensuring efficient engine performance and reduced emissions. Regular maintenance and timely replacement prevent increased emissions and engine issues.

A rear main seal leak can lead to significant oil loss and severe engine damage if not addressed promptly. This critical seal, located at the back of the crankshaft, prevents oil from leaking out of the engine. Early detection and repair are essential to maintain engine health and performance.

A malfunctioning fuel tank pressure sensor, integral to the EVAP system, can lead to problems like poor engine performance, hard starting, and a persistent "check engine" light. Positioned in or atop the fuel tank, it detects leaks. Fixing minor leaks is simple, but sensor repairs often need tank removal.

Car AC problems often stem from low refrigerant, a faulty compressor, dirty condenser, electrical issues, or a bad blower motor. Regularly servicing your AC system, cleaning the condenser, checking for leaks, and using diagnostic tools like the ANCEL X7 can ensure efficient operation and longevity.

A cabin air filter keeps your vehicle’s interior air clean by filtering out dust, pollen, and pollutants. It should be replaced every 12,000 to 15,000 miles or once a year to maintain HVAC efficiency, prevent odors, and protect passengers from allergens and respiratory issues.