Boost Your Car's Performance for Free-Master the Use of a Scanner in Just Simple Steps

    ANCEL's Car Scanner help you to boost yoour cars' perfermance.

     You don't need to be a professional mechanic to take full advantage of using a car scanner. With the right tools and a bit of know-how, anyone can conduct thorough inspections and understand the diagnostics of their vehicle. In this guide, we'll show you exactly how to fully utilize your car scanner to keep your vehicle running smoothly and efficiently. Whether you're looking to resolve dashboard warning lights or simply want to optimize your car's performance, Learning how to use your car scanner  that can save you time and money.

    How Do You Scan A Car With A Scanner

    Scanning a car with a scanner typically involves using a specialized device that is engineered to interact with and diagnose issues within a vehicle's complex electronic systems. These devices, known as OBD-II  scanners, are essential tools in modern automotive troubleshooting. They provide critical insights into the status of various systems and components by reading the codes generated by the car’s onboard computer. Here’s a general guide on how to do it:

    • Locate the Diagnostic Link Connector (DLC): Most cars have the DLC under the dashboard on the driver's side. It's a 16-pin connector where the scan tool plugs in. The location can vary, so check your vehicle's owner manual if it’s not immediately visible.
    • Plug in the Scanner: With the car’s ignition off, connect the scanner to the DLC. Make sure it’s securely connected.
    • Turn on the Ignition: Switch the car's ignition to "On" or "Run" (not starting the engine). This powers the car's electronics and the scanner.
    • Initialize the Scanner: Follow the scanner’s instructions to initialize it. This may involve selecting the make and model of your car or allowing the scanner to auto-detect the vehicle.
    • Perform a Scan: Navigate the scanner’s menu to select the type of scan you want to perform. You can do a general scan of all systems or target specific parts like the engine, transmission, ABS, etc. Start the scan and wait for the scanner to retrieve the data.
    • Read the Codes: Once the scan is complete, the scanner will display any diagnostic trouble codes (DTCs) it has found. These codes are typically alphanumeric and can indicate what might be wrong with the vehicle.
    • Interpret the Codes: Use the scanner's manual, an online database, or a professional service to interpret what the codes mean. This will tell you what issues have been detected and can guide repairs.
    • Clear Codes: If applicable, you can use the scanner to clear the trouble codes. This is useful after fixing the issues detected. However, simply clearing the codes without repairs won’t solve underlying problems and the codes will likely reappear.
    • Disconnect the Scanner: Turn off the ignition, remove the scanner, and store it safely.

    Related Reading: Should I Buy an Obd2 Scanner?

    Do You Turn Car On When Using OBD2 Scanner

    Should the car be running? The answer isn't straightforward and depends on what you need to check. Here’s how to determine when to keep your engine running and when it’s safe to turn it off.

    Engine Off: Preliminary Checks

    For initial diagnostics, such as reading error codes, you do not necessarily need to have your engine running. In this phase, simply turning your vehicle’s ignition to the 'on' position activates the electrical system, allowing your scanner to communicate with the car’s computer. This is sufficient for retrieving stored data.

    Engine On: Real-Time Data Monitoring

    If your diagnostic checks require monitoring real-time data or if you need to clear certain codes, having your engine running might be necessary. This includes tasks like checking the engine’s RPM, live fuel injection data, or emission system status. For accurate readings, keep the engine idling.

    Regardless of whether your engine is on or off, always ensure you’re parked in a safe location and that the car is in neutral or park. Safety should never be compromised during diagnostic procedures.

    ANCEL X7 Live Data helps you know the condition of your car at any time

    Do Car Scanners Work On All Cars

    Car scanners come in a variety of forms, ranging from basic code readers to professional-grade scan tools that offer extensive diagnostics. Basic models provide error codes from the engine control unit (ECU), while more advanced scanners can monitor a wider range of systems and provide detailed feedback.

    Since 1996, the On-Board Diagnostics II (OBD-II) standard has been mandatory for all cars sold in the United States. This standard ensures that most scanners can interface with these vehicles. If your car is a 1996 model or newer, an OBD-II scanner is likely to work with your vehicle.

    Older vehicles, especially those manufactured before 1996, might not support OBD-II scanners. These cars often require specific adapters or proprietary scanners designed for their unique systems. Similarly, high-end luxury cars or specialized vehicles might use unique diagnostic systems, limiting the compatibility of universal scanners.

    For deeper diagnostics, enhanced scanners are capable of interfacing with car systems beyond the standard ECU. These tools can read transmission codes, ABS (Anti-lock Braking System) codes, and other specialized data. However, their effectiveness can vary based on the car's make and model.

    Before purchasing a scanner, check its compatibility with your car’s model and year, especially if you own an older or more specialized vehicle.

    While no single car scanner works universally on all vehicles, a wide range of tools are available to suit nearly every need.

    Car Scanner | ANCEL
    ANCEL X7 Full System Automotive Scanner Immobilizer Key Programming

    ANCEL is Your Best Choice

    ANCEL distinguishes itself with both universal and brand-specific models. The universally compatible ANCEL X7 is particularly notable for its extensive range of features that accommodate a diverse array of vehicles.

    Why Choose ANCEL X7?

    ANCEL distinguishes itself with both universal and brand-specific models. The universally compatible ANCEL X7 is particularly notable for its extensive range of features that accommodate a diverse array of vehicles.

    The ANCEL X7 bi-directional scan tool is an essential device for modern auto diagnostics. It supports control modules across numerous systems within a vehicle. This includes critical components like mirrors, sunroofs, door locks, radiator fans, horns, and lighting systems. The tool's functionality allows mechanics to actuate these systems, testing each module's operation and pinpointing any malfunctions or issues that require attention.

    Immo Key and Comprehensive System Analysis

    The ANCEL X7 excels in providing a thorough analysis of vehicle systems, identifying potential issues before they become major problems. This diagnostic prowess empowers mechanics, enabling quick and precise identification of faults, which streamlines the repair process and reduces downtime for the vehicle.

    ECU Coding for Enhanced Vehicle Performance

    One of the standout features of the ANCEL X7 is its capability for ECU coding—also known as ECU programming or re-flashing. This process involves updating the software within a vehicle's engine control unit (ECU) to enhance performance metrics such as fuel efficiency, ignition timing, and the air/fuel ratio. For owners of VW and Audi vehicles, ECU re-flashing can significantly boost engine performance, resulting in greater horsepower, increased torque, and improved overall engine efficiency.

    Connectivity and Power

    Connectivity is seamless with the ANCEL X7. It includes options for Bluetooth and USB connections, ensuring reliable communication between the scanner tablet and the vehicle's control interface (VCI). The scanner's power indicator and connectivity functions are intuitive, with clear guidelines for troubleshooting connection issues, similar to standard computer operations.

    Despite its advanced features and comprehensive capabilities, the ANCEL X7 is priced competitively at $369.99, down from the original price of $499.99, making it an affordable choice for both professional mechanics and car enthusiasts seeking a reliable diagnostic tool. Check it now!

    ANCEL X7’s multiple functions can help you check your car in all aspects

    Can You Scan Your Car With Your Phone

    You can scan your car with your phone using various mobile apps paired with a compatible OBD-II (On-Board Diagnostics II) scanner. These devices connect to your car’s diagnostic port and can send data directly to an app on your smartphone. This setup allows you to read diagnostic trouble codes, monitor car performance, and sometimes even clear error codes, all from your phone. If you want more specialized data, the car scanner would be a better choice!

    Here is a comparison between the car scanner app and car scanner!

    Mobile Car Scanner Apps


    • Convenience: Easily accessible and portable, mobile apps can be used anywhere, as long as you have a compatible OBD-II adapter and your smartphone.

    • Cost-Effective: Generally less expensive than dedicated tools, with many apps available for free or at a low cost. The main expense is the OBD-II Bluetooth or Wi-Fi adapter.

    • User-Friendly: Designed for non-professionals, these apps often have simple, intuitive interfaces that make it easy to monitor basic diagnostic information.


    • Limited Capabilities: Most mobile apps are suitable for basic diagnostics, such as reading and clearing error codes, but they may not offer advanced features like real-time data logging, ECU programming, or specific manufacturer codes.

    • Dependence on Phone Performance: The effectiveness and speed of a mobile car scanner app can be limited by the performance of your smartphone.

    • Compatibility Issues: Some apps may not work with all adapters or vehicle models, potentially leading to inaccurate data or connectivity issues.

    Car Scanners


    • Comprehensive Diagnostics: Dedicated tools are typically more robust and provide detailed diagnostics, including advanced features like bi-directional control, real-time data, and comprehensive manufacturer-specific diagnostics.

    • Reliability: These tools are specifically designed for automotive diagnostics, offering greater accuracy and consistency.

    • Professional Use: They are often built to handle the rigors of a professional automotive environment, with interfaces and features tailored for mechanics and serious enthusiasts.


    • Higher Cost: Dedicated scanners are more expensive, sometimes costing hundreds or even thousands of dollars.

    • Less Portable: While still portable, these devices are often bulkier and require more setup than simply plugging a dongle into a car and opening an app.

    If you require basic monitoring and troubleshooting, a mobile app is a cost-effective and convenient solution. However, for more detailed diagnostics, frequent use, and professional-grade insights, a dedicated scanner is the better investment.

    For more information related to car scanners, follow ANCEL now!

    We Tested the best OBD2 car scanners for BMW that will help you diagnose your BMW easily No mechanic needed—this affordable car scanner thoroughly checks your vehicle


    Hinterlasse einen Kommentar

    Deine Email-Adresse wird nicht veröffentlicht. Pflichtfelder sind markiert *