How to Use Ancel AD310

    Car Scanner Diagnostic Tool

    The Ancel AD310 device is an efficient and powerful tool that can benefit you immensely when used correctly. Designed as an affordable obd2 bluethooth scanner, it has many features comparable to professional scanners, especially for beginners.

    If you've recently obtained the Ancel AD310, you might be eager to explore its functionalities. The process is relatively straightforward, especially if you follow the steps outlined below. Prepare to be impressed by its remarkable performance.

    Step 1: Unboxing the Scanner

    Before diving into your vehicle, it's crucial to perform a few checks upon receiving your package. Inside the box, you'll find the handheld device, which measures approximately 5 inches in height and 3 inches in width. The Ancel AD310 features a large LCD screen, slightly under 3 inches in size. Additionally, the box contains a user manual and a 31-inch cord. After removing the diagnostic tool, connect the cable to the device.

    Step 2: Locating the OBDII Port in Your Car

    The AD310 code reader exclusively functions with vehicles equipped with a second-generation diagnostic link connector. To ensure compatibility, your car must have been manufactured after 1996. In such vehicles, the DLC or OBD2 port can be found in various locations. It typically appears as a 16-pin trapezium-shaped port situated beneath the steering column on the driver's side. However, it may also be positioned on the passenger's end of the dashboard or within the center console. If you're unable to locate the port, consult your owner's manual or conduct an online search.

    Step 3: Connecting the Ancel AD310 to the DLC

    Before proceeding with this step, ensure that your vehicle is turned off. The scanner's cord features a trapezium-shaped end with 16 male pins, which should be plugged into your car's OBD2 port. Once connected, turn the ignition key to the on position, allowing your vehicle to enter idle mode.

    Note that some scanners may become damaged if the engine is started while they're connected. However, Ancel scanners are designed to avoid any communication with your car's ECU until the vehicle is in idle mode. Once this occurs, the AD310 will power on and establish communication with your car.

    Step 4: Automatic Retrieval of Car Information

    Despite being a best budget obd2 scanner, the AD310 is capable of independently retrieving important information about your vehicle including VIN and model. Unlike other scanners in the same price range from different manufacturers, the AD310 eliminates the need for manual data entry. However, if you have a different scanner, you can find the VIN in the lower corner of the windshield on the driver's side or under the hood or on the front of the frame. Giving this information to the scanner will save you trouble as the AD310 can retrieve it automatically.

    Relevant:Step by Step Guide on Using Obd2 Scanners

    Step 5: Accessing the Diagnostic Trouble Codes

    As you operate the scanner, codes will start appearing on the screen, retrieved from your car's ECU. Two types of codes may be displayed: active codes and pending codes. Active codes are responsible for triggering the check engine light, indicating ongoing issues. On the other hand, pending codes indicate problems that require attention, such as failures within the vehicle's emission control system.

    If a pending code continues to reoccur, it will transition into an active code due to persistent issues. The active codes will illuminate the check engine light. With the Ancel AD310, you can scroll through the displayed codes to identify the specific diagnostic trouble codes associated with the problems.

    For additional information on using OBD2 scanners, you may find our article "Step by Step Guide on Using OBD2 Scanners" relevant and informative.

    Step 6: Decoding and Understanding the Trouble Codes

    Now that the OBD codes are visible, it's time to comprehend their meanings. Each trouble code begins with a letter, followed by four digits. Each digit plays a crucial role in pinpointing the problematic area of your vehicle. The letters signify the following:

    • P (Powertrain): This code denotes an issue related to the engine, ignition, transmission, emissions, or fuel system.
    • B (Body): It signifies problems affecting the power steering, airbags, or seatbelts.
    • C (Chassis): This letter indicates concerns regarding brake fluid, axles, or the antilock braking system.
    • U (Undefined): Issues that don't fall under the P, B, or C categories are classified here.

    Following the letter, the four digits provide additional details. The first number can be either "0" or "1." "0" signifies a generic trouble code, while "1" indicates a manufacturer-specific code. The second digit specifies the particular part of your vehicle that requires attention, while the last two digits provide further insights into the specific problem. The Ancel AD310 also offers live data for a more comprehensive history and information.

    Car Scanner Computer

    Step 7: Interpreting the Codes and Addressing the Issues

    The Ancel AD310 goes beyond merely displaying the codes; it provides in-depth explanations of their meanings, a feature typically reserved for professional scanners. However, it's important to note that no code scanner can resolve the issues on its own. While the scanner informs you about the problem, it does not provide instructions on how to fix it.

    Therefore, it's crucial to assess the severity of the issue and decide whether you possess the necessary expertise to resolve it yourself or if it's best to seek assistance from a mechanic. Unless you're fully confident in your abilities, it's generally advisable to rely on a professional to avoid costly mistakes.

    Step 8: Resetting the Check Engine Light

    Having completed the majority of the process, the final step involves resetting the check engine light (CEL). The Ancel AD310 not only stores the codes but also has the capability to reset the check engine light. While driving your vehicle after fixing the issues would typically cause the check engine light to turn off, the AD310 allows for immediate code erasure.

    Once initiated, the resetting process takes a few minutes, and the CEL will be deactivated. However, please bear in mind that this is a temporary solution. If the underlying issue remains unresolved, the check engine light will reappear as long as the problem persists. Only after successfully addressing the problem will the CEL remain off permanently.

    Final Remarks

    Considering its price, Ancel OBD scanners like the AD310 do a really good job. Ideal for DIY enthusiasts, this scanner offers a variety of barcode reading features. With real-time data, vehicle information, EVAP leak testing, and other impressive features, the Ancel AD310 is the best scanner under $100. You can conveniently buy online from Ancel website and have it delivered to your door within days.


    What is the purpose of an air filter in a car?

    The air filter in a car removes dust, debris, and contaminants from the incoming air before it enters the engine.

    How often should I change my engine oil?

    It is generally recommended to change the engine oil every 5,000 to 7,500 miles or as per the manufacturer's guidelines.

    What does ABS stand for in relation to automotive braking systems?

    ABS stands for Anti-lock Braking System, which prevents the wheels from locking up during sudden braking, allowing the driver to maintain steering control.

    We recommend for you:

    The Best Heavy Duty Truck Scanners: Which One to Choose? How to Use an Ancel OBD2 Scanner


    2 thoughts on “How to Use Ancel AD310

    Tim Stamets

    I don’t get a main menu. I get 6 codes with numbers and some ketters

    April 18, 2024 at 06:37am
    Gary Sueltz


    October 18, 2023 at 01:53am

    Leave a comment

    Your email address will not be published. Required fields are marked *