ANCEL FD700 OBD2 Escáner Todos los sistemas DPF EPB BMS ETC Restablecimiento de aceite para Ford

$138.99 USD $119.99 USD SAVE 14%

paypalvisamasterjcbamerican expressdiners clubdiscovermaestroklarna
Order in the next [totalHours] hours %M minutes to get it between and

    Full OBD-II Modes

    OBD-level diagnostics for all car brands

    All System Scan Tool

    In-depth diagnosis of all available modules

    Designed for BMW Diagnosis

    Only works with BMW's deep reset service

    Extensive Compatibility

    Compatible with most 1996 to present vehicles

    Easy to Use

    Complete operating instructions & user-friendly UI

    FD700 OBDII Scan Tool

    The FD700 scan tool is designed specifically for Ford, Lincoln, and Mercury cars, which can quickly scan and easily access all systems (engine, SRS, TPMS, ABS, SAS, ESP, TCM, CKP, EPB, EPS, BMS, etc.), while supporting the body, chassis, powertrain, and all control modules. It can read and clear fault codes, and has various special functions to help you effectively maintain your car, providing you with good repair assistance while saving time and money.

    All System Diagnostic for FORD

    1. Engine System: The engine determines the power, economy, stability of the car. The FD700 OBD2 scanner can support 6 modes of OBDII functions & check battery voltage. Easily identify vehicle problems and turn off the engine lights. Help you pass the smog test and keep your car in the best condition.

    2. TPMS Reset: When there is a problem with the tire pressure of your car, or when you have inflated the tires to the correct level, the PSI tire pressure monitoring system warning light still lights up for no reason. It can quickly locate tire sensors from the vehicle's ECU, reset tire pressure, and turn off the tire pressure fault indicator light.

    3. SRS: The FD700 can read and erase the SRS(Airbag) system error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.

    4. SAS: SAS Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor. The FD700 helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

    5. Battery System Diagnosis: Evaluate the battery charge state, monitor the closed-circuit current, battery management system reset, detect real-time data from 12V batteries, and display BATTERY DATA with fluctuations ranging from 8V to 18V.

    6. EPB: FD700 scanner can read and clear EPB trouble codes and is capable of retrieving fault codes information from the ECU.

    7. ABS: It helps maneuverability while hard braking. ABS essentially prevents the wheels to lock up and skid when brakes are slammed.

    8. Transmission: Auto Transmission is a set of transmissions used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. FD700 OBD2 scanner can read/clear codes and read data stream from AT.

    9. Oil System: Oil reset, check the oil at regular intervals, and have the car serviced regularly. After draining the oil out of the engine, the FD700 scan tool can help you to reset the Oil service lamps.

    Full OBDII Modes

    FD700 Car Diagnostic Tool has basic OBD2 multiple modes diagnosis to engine system on all brands vehicles , including code reading, code clearing, I/M readability, viewing data flow, conducting EVAP test, and reading vehicle version information (VIN, CID, CVN). Strong compatibility can help you efficiently diagnose other vehicle engine systems, which is cost-effective and suitable for independent use by car owners in case of unexpected needs.

    ABS System Diagnosis

    The scan tool can read/clear the ABS sensor fault code, read the data stream, and turn the warning light off. It supports ABS Service Bleed, the Auto Bleed function will help get air that is trapped in the ABS actuator module out when bleeding your brake lines to ensure that repairs to this vital system are effective and complete. You can make a determination of what could be the causes of the error: low brake fluid, a blown fuse, or abnormal signals from wheel sensors.

    Oil Service Reset

    The engine oil life system calculates when to replace the engine oil and filter based on the vehicle's usage. When the indicator light on the dashboard lights up, the oil needs to be changed. After changing the oil, the system needs to be reset so that it can calculate the time for the next oil change.

    Battery Registration

    Disregarding the need to register and code for a new battery may result in improper charging. FD700 can help you register a new battery once you replace it, re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.

    Note: 1. Not all vehicles need to do a battery reset after changing batteries. 2. If the parameters of the new battery are inconsistent with the old battery or the parameters are too different, registration may fail.

    TPMS Reset

    If the TPMS (Tire Pressure Monitoring System) light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure. FD700 car code reader can read and clear TPMS error codes and turn off the TPMS warning light after you replace the tire. (Note: Not every Ford vehicle supports this function. Subject to practice. A pre-purchase inquiry is suggested.)

    TPMS Reset: Tire pressure resetting is required to be performed after maintenance is performed.

    EPB Reset

    If the parking brake fails, it is necessary to replace the brake pads by retracting the caliper and moving the caliper back to its original position after maintenance to solve the problem. After replacing the brake pads or repairing the calipers, the FD700 diagnostic tool can help you reset the brake pads.

    Car Support List

    Compatible with most Ford Group vehicles ( Ford, Lincoln, and Mercury) from 1996 to 2023, including Edge, Ecoport, Expedition, Escape, Explorer, F150, F250, F650, F750, Fusion, Ranger, Bronco, Blackwood, B-Max, C-Max, Continental, Transit, Fiesta, Taurus, MKC, MKX, MKZ, Zephyr, Milan, Cougar, etc; Having complete OBD2 functions for all other brand cars after 1996 (12V-16PIN).

    What's in the box?

    FD700 Scan Tool with 16 Pin Cable x 1
    User Manual x 1

    USB Cable x 1

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    Michael Young
    FD700 saved me a bundle

    The ABS light in my 2000 F-150 continued to stay on after I did what I thought was an obvious fix-replaced the pump module. Not knowing what else to do at that point, I contacted Ford service for diagnosis and repair. Before taking it in, I thought possibly a diagnostic tool would tell me what is wrong-it would at least be a way to see if the Ford diagnosis was the same. I ordered the FD700, hooked it up to the diagnostic port, and it told me exactly what was wrong (bad middle rear speed sensor) and a YouTube video showed me how to fix it myself. The local auto parts store carried the part (only $25!) and it took less that an hour to extract the defective sensor and install the new one. Viola! The ABS light is off now. The FD700 is easy to use and gave me an accurate diagnosis-and saved me hundreds of dollars. Great product, thank you!

    Judge.me YouTube video placeholder