ANCEL BST600 Car Battery Tester Printer 12V 24V 100-2000 CCA Automotive Battery Load Cranking Charging Test Battery Analyzer

Battery system testers are used for activated style lead-acid storage battery, and checking the battery conditions (temperature, starting up, charging, electrical loading). Precise circuit and strong digital processing unit make it collect a series of complicated data completely and figure out every test data, which is available by 4-wire Kelvin test connection.Besides, it strengthens input protection inside to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps, and so on.

ANCEL BST600 battery tester is designed with convenience and broad functionality in mind. In addition to the printer function, it features a wide capability for the purpose of battery diagnosis and maintenance. It works on 12V and 24V battery systems, including the actual Cold Cranking Amps test, the health status test, and the diagnosis of both starting and charging systems for common faults. It also has an integrated printer capable of printing out test results for improved service. This tool lets you know the condition of the battery system in advance, saves a trip and money to an auto repair shop.

ANCEL BST600 12V 24V BATTERY ANALYZER WITH PRINTER

1. Tests 12V & 24V battery, cranking system, and charging system.
2. Test Multiple Battery Types: Regular flooded, AGM flat plate, AGM spiral, Gel and EFB;
3. Supports all battery rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
4. Test result: Status of health (SOH), Status of charge (SOC), Measure CCA value, Battery temperature, Voltage, internal resistance, Ripple Test, load test,Data Review,Print Test Report. Displays test result in merely seconds, more accurate than the low-priced tester.
5. Tests in-vehicle battery and single storage battery.
6. Quick starter analysis without disabling the ignition.
7. Easy to use and read with large backlight LCD display and menu-driven operation.
8. Support languages: English,Deutsch ,Italiano,francais,Espanol,polski,русский,Nederlands,Japan and More

• The Printer doesn't work or paper tape jams ?
• ANSWER:
• We will 100% check whether the product has printing problem before shipment, so the probability of failure is very low.Most of the problems are caused by improper operation.
• Please Check if you have the following problems:
• 1.Printer roller problem: is the Thermal paper installed correctly? When the printer is working, the thermal printer presses the thermal paper firmly by using the roller. If the roller becomes loose, it will cause poor contact between the thermal print head and the thermal paper, and no words can be printed. At this time, you can open the cover, check whether the roller is pressed to the paper surface, and adjust it appropriately.
• 2. Thermal paper problem: A: paper dust and dirt may cause the printer not to print correctly. B: the thermal paper has expired ? You can scratch the thermal paper with your fingernail, Make sure there is a black mark. Only on this side can be printed. If there are no scratches on both sides, the thermal paper has expired and cannot be used.
• 3.is it Thermal paper ? Please make sure it is Thermal paper, other paper cannot be printed successfully.
• If you still have problems, please ASK QA OR ...
• what size is the Thermal paper ?
• thermal paper size: 2 1/4" W X 1 1/5" D ( 57mm W x 30 mm D )
• Included one roll thermal paper in the product.
• Does this require installing a 3V coin cell battery to update the printed time ?
• It's up to you, The 3V coin cell battery (button battery,such as CR2032) just provides power for updating the date & time,the printed date & time will be more accurate after installation.Notice:button battery can be installed on the back, it is not included.