ANCEL FX8000 All System OBD2 Diagnostic Scan Tool EPB TPS SAS BMS ABS Oil Reset

$299.99 $249.99 SAVE 17%

ANCEL FX8000= All System Diagnostic + 6 Special Reset + Full Obd2 Functions + Wifi Lifetime Free Update ANCEL FX8000 Car Diagnostic Tablet Scanner is the newest evolutionary Android smart solution for 12V...

paypalvisamasterjcbamerican expressdiners clubdiscovermaestro
Description

ANCEL FX8000= All System Diagnostic + 6 Special Reset + Full Obd2 Functions + Wifi Lifetime Free Update

ANCEL FX8000 Car Diagnostic Tablet Scanner is the newest evolutionary Android smart solution for 12V passenger car, light duty, pickup truck diagnosis & maintenance. Covering more than 57 car brands.it's designed for car repair garages, car beauty service parlors, auto mechanics, and DIY car owners' auto scanners. This FX8000 OBD2 Scanner support All systems Diagnoses, 6 Reset Function, and All OBD-II functions.

ANCEL FX8000 OBD2 Scanpad Main Function

● Full System Diagnostic & Scan: This car obd2 scanner is capable of reading and clearing trouble codes of all major systems, including Engine, Airbag/SRS, Transmission, ABS, SAS, Air Conditioning, ACC, Audio, Headlight, Center Lock, ESP, Suspension failures, ect. It also can temporarily start and control your vehicle’s systems for active testing, and provide you with accurate data results about troubleshooting and diagnostic problems.

● Advanced Features:ABS Bleeding; SAS, Steering Angle Sensor Calibration; BRT, Battery Replacement;  EPB, Electronic Parking Brake;  Oil Service Reset; TBA/TPS, Throttle Body Alignment;

● Universal OBDII/EOBD engine scan: obd2 diagnostic code reader provides comprehensive OBDII diagnostics for global OBDII/EOBD vehicles, reads and clears codes, turns off MILs, requests, and records live sensor data, ect. except live data reading. In addition, it supports all 10 OBDII test modes, including the mode 6 test. The powerful graphing capability gives you the "real picture" of what's going on in the vehicle, which allows you to focus on any suspicious or symptom-specific data parameters.
 

ANCEL FX8000 Support Diagnose Car Full System

This option allows you to detect whether the car's full system parameters are normal or not. It mainly includes Drive System, Chassis System, Body System, and Electrical system.

1. PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more...

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more...

3. BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...

4. Electrical System Including Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication, and information/entertainment system. Read and erase codes for all available systems, turn off the MIL light (Indicator light), and display live data in text, graph & analog for easy data review.


ANCEL FX8000 Support Below 6 Kinds Maintenance Functions:

In addition to amazing & powerful diagnostic functions, FX8000 also features various service functions. The most commonly performed service functions contain:

1. Oil Lamp Reset Service Allows you to perform a reset for a new calculation of the Engine Oil Life system once changed the oil.

2. EPB Electronic Park Brake Reset It is important in the maintenance of the electronic braking system's safety and efficiency.

3. BAT battery service Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4. SAS Steering Angel Sensor Reset Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

5. ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion after repairing the ABS pump system.

6. Throttle Adaptation The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning the throttle sensor position after clearing or repair.

Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and storing freeze frame data.

4. I/M Readiness Status: This shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in a live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the onboard computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s onboard computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Support Languages

English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, and Korean.

Professional Fast Identifies VIN Number:

Once connected with the car OBD2 port, FX8000 will AutoDetect car Vin number. Give you quick access to start the vehicle system detection.

Perfect Performs Vehicle Battery Analysis

For 12V cars, SUVs, Van, Light Truck, and Pickup. Detect real-time data from 12V batteries and display BATTERY DATA with fluctuations ranging from 8V to 16V. The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V.

One-Key I/M Checking

It supports one-key I/M checking for all available emission systems. Help your car pass the emission test more simpler.

ANCEL FX8000 Technical Support

LAUNCH Technical team offers free support for you, once you meet any problem, you can

1. Upload Could Feedback

2. Share Diagnose report

3. Contact customer service directly

Other Features of ANCEL FX8000

1. DTC Library: Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.

2. Diagnostic Feedback: Use this option to submit the vehicle issue to us for analysis and the report can be saved offline.

3. Diagnose Report Share & Printed: you can share the diagnose report to your email, then print it via computer.

4. Sensitive Touch & Keypad input are supported

5. Global vehicle coverage.Including Indian and Russian car brands. And many more...

ANCEL FX8000 Car Supported List:

Full System Diagnose Scan: For Abarth, For Accura, For Alfa Romeo, For Audi, For BMW, For Bugatti, For Buick, For Cadillac, For Chevrolet, For Chrysler, For Citroen, For Dacia, For Daewoo, For Daihatsu, For Dodge, For Eurford, For Fiat, For Ford, For GM, For Gmsa, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For Kia, For Lancia, For Landrover, For Lexus, For Lincoln, For Mahindra(Indian), For Maruti(Indian), For Maserati, For Mazda, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Nissangtr, For Opel, For Peugeot, For Porsche, For Renault, For Renault Samsung, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata(Indian), For Tlisuzu, For Toyota, For Vauxhall, For Volvo, For VW, For VAZ

How to use ANCEL FX8000

1. Input the email address to register your account after the WIFI connection.

2. Download the vehicle brands.

3. Connect FX8000 with car OBD2 port and start diagnose

ANCEL FX8000 Technical Parameters

Operating System: Android 7.1

Processor: Powerful Quad-Core

Processor RAM:1GB

ROM:16GB

Display:7 inch IPS touchscreen

Connectivity: Mini USB 2.0, Wi-Fi

Battery:6000mAh lithium-polymer battery

Battery Life: more than 8 hours

Product Size:9.8x5.5x1.5(inch)

Product Net Weight: 700g

ANCEL FX8000 Package List:

1 * FX8000 Handset

1* OBDII Diagnostic Cable

1 * 5V DC Charging Cable

1 * Power Adaptor

1 * Quick Start Guide

1 * User Manual